How often does OSHA require cranes to be inspected?Ī Crane Lift Plan is required for every crane lift on a Dimeo project – see OSHA Subpart CC for definition of crane.What is the first step in planning a lift?.What is the maximum lifting weight for one person?.Can an employer force you to lift heavy objects?.What are the requirements to start crane lifting?.Where appropriate seek additional support and expertise including the use of external specialists to assist them with the planning of lifting operations.Be able to create method statements or lifting plans and implement safe systems of work for lifting operations.Carry out and document risk assessments (lifting operation) or site surveys have the ability to communicate their findings to those involved in and affected by the lifting operations.Understand the characteristics of the lifting equipment they are selecting and the nature of the work it will be carrying out. Be able to select the correct lifting equipment for the work.Be capable of identifying the hazards and risks associated with lifting operations within their area of work or the environment where the lifting operation will take place.Persons who have been appointed or been given the responsibility for planning to lift operations should have sufficient technical, practical, and theoretical training, knowledge, and experience of the work they are likely to safely plan /assess the lift. The survey must be completed by a competent person(s).Īlso, Competent Persons shall ensure all configuration of lifting Operation Physically using Liftplan audit checklist below to avoid any missing or mistakes could occur at paper works and drawings the checklist include the following Main Items: It is essential that a survey be conducted to establish what the load to be lifted is, what all the characteristics are, weight, size, type of lifting lugs, etc., what the ground conditions are, where it has to be lifted from and to, what the access route is like, etc. The process to ensure transfer and communication of all relevant information and documents is therefore recorded in the Lifting Plan. Additionally, accidents are often a result of either poor planning or lack of communication between or among stakeholders, this sometimes resulting in loss of vital information that is fundamental to the safety of the operation. While the WSH Act imposes a duty on the occupiers, employers, and principals of a workplace, the risks inherent in the planning of all lifting activities are required to be addressed, with mitigating actions identified and implemented. To address risk at source, there is a need to look at whom and what creates the risks, every effort should then be made to eliminate or minimize such risks to the lowest possible levels. Workplace Safety and Health Act (WSH Act), reducing risk at source is one of the components to improving workplace and worksite safety. Planning is an essential component in every lifting operation at all workplaces.
The process of carrying out correct and safe lifting operations involves a range of requirements that must be considered during the planning of any lifting operation. Incorrect lifting methods, however, can lead to major accidents and fatalities.
Good practice and correct lifting methods can move large objects efficiently, safely, and reduce manual handling operations. Lifting of objects generally takes place at construction sites, shipyards, factories, and other industrial situations such as offloading with a forklift truck, containers at a warehouse, or at aĬommercial area.